SFSP112
LEABON
SFSP112 Series Hammer Mill
Features
Widely used in feed mills, food factories, livestock farms, etc;
Used for crushing various kinds of pellet raw materials such as corn, sorghum, wheat, bean, wood chip, etc; it’s an ideal general type hammer mill;
Rotor has passed high precision balance test; small vibration and long service life;
The hammer, screen and pin axle have gone through special heat treatment; they have a long service life and high crushing effect;
The operating door has a self-locking mechanism, convenient, safe and reliable.
Technical parameter
Model name | 88 - I | 88 - II | 88 - III | 88 - IV | 88 - V | ||||||
Rotor diameter (mm) | 1120 | 1120 | 1120 | 1120 | 1120 | ||||||
Spindle speed (rpm) | 2987 | 2987 | 2987 | 2987 | 2987 | ||||||
Hammer's linear speed (m/s) | 86.5 | 86.5 | 86.5 | 86.5 | 86.5 | ||||||
Width of grinding chamber (mm) | 290 | 380 | 500 | 760 | 1000 | ||||||
Hammer Q’ty(pcs) | 54 | 64 | 90 | 136 | 180 | ||||||
Normal air volume (m³/min) | General crushing | 42 | 46 | 55 | 61 | 73 | 80 | 110 | 120 | 145 | 160 |
Fine crushing | 55 | 60 | 72 | 78 | 95 | 102 | 145 | 155 | 190 | 205 | |
Power (kw) | 55 | 75 | 90 | 110 | 132 | 160 | 200 | 220 | 250 | 300 | |
Capacity (t/h) | 9 | 12 | 15 | 18 | 22 | 26 | 33 | 36 | 40 | 50 |
Note: raw materials for the China dry corn, moisture ≤ 14%;volume ≥ 0.72 T/m³
Mesh hole size: Φ 3mm; hole area percent is no less than 33% for fine crushing.
SFSP112 Series Hammer Mill
Features
Widely used in feed mills, food factories, livestock farms, etc;
Used for crushing various kinds of pellet raw materials such as corn, sorghum, wheat, bean, wood chip, etc; it’s an ideal general type hammer mill;
Rotor has passed high precision balance test; small vibration and long service life;
The hammer, screen and pin axle have gone through special heat treatment; they have a long service life and high crushing effect;
The operating door has a self-locking mechanism, convenient, safe and reliable.
Technical parameter
Model name | 88 - I | 88 - II | 88 - III | 88 - IV | 88 - V | ||||||
Rotor diameter (mm) | 1120 | 1120 | 1120 | 1120 | 1120 | ||||||
Spindle speed (rpm) | 2987 | 2987 | 2987 | 2987 | 2987 | ||||||
Hammer's linear speed (m/s) | 86.5 | 86.5 | 86.5 | 86.5 | 86.5 | ||||||
Width of grinding chamber (mm) | 290 | 380 | 500 | 760 | 1000 | ||||||
Hammer Q’ty(pcs) | 54 | 64 | 90 | 136 | 180 | ||||||
Normal air volume (m³/min) | General crushing | 42 | 46 | 55 | 61 | 73 | 80 | 110 | 120 | 145 | 160 |
Fine crushing | 55 | 60 | 72 | 78 | 95 | 102 | 145 | 155 | 190 | 205 | |
Power (kw) | 55 | 75 | 90 | 110 | 132 | 160 | 200 | 220 | 250 | 300 | |
Capacity (t/h) | 9 | 12 | 15 | 18 | 22 | 26 | 33 | 36 | 40 | 50 |
Note: raw materials for the China dry corn, moisture ≤ 14%;volume ≥ 0.72 T/m³
Mesh hole size: Φ 3mm; hole area percent is no less than 33% for fine crushing.