1. Working principle1) During extruding process, material feed from the end of machine cavity convey to the whole cavity by screw, then divided into several regions at extruded part, each region have a ring (press ring) to control flow and press. Screw convey function drive the material through the

Check whether the raw material is in consistency. Refer to lowing four material for pellets production. 1. Insert the plug of the machine, and press the start button. The engine should start and the die turns.If the engine does not turn, immediately press the stop button, and check or investigate th

1. FeederFeeder consists of screw shaft, shell, cycloid pin gear reducer, conversion speed-adjustable motor, bearing with housing, e pick of screw is of full face. The pitch is variable. The screw shaft is driven to rotate by cycloid pin gear reducer, conversion speed-adjustable motor and chain driv

The structural principle of feed pellet machine: 1. Avoid animal picky eaters. The compound feed formula has a variety of raw materials and is comprehensive in nutrition, which prevents the animal from picking up the favorite food from the powder and refuses to ingest other ingredients. 2. High retu

1)Clean the gate at top of feeding bin every week, to avoid its block cause feeding time delay2)Clean the residual material on feeder cylinder wall every week3)Clean the residual material at the connecting part of feeder and inlet conditioner every week4)Clean the add water nozzle and steam nozzle e