Zhengzhou Leabon Feed Machinery Co.,LTD.
Zhengzhou Leabon Feed Machinery Co.,LTD.
Home / News

NEWS

Clients

NEWS ANG EVENTS

  • Aug
    13
    What Are The Advantages of PTO Bale Shredder?
    What are the advantages of PTO bale shredder?The cylindrical fully automatic straw crusher is a new type of fully automatic machinery. The cylinder is equivalent to an automatic feeding mechanism, which does not require a manual feeding rod. It can be fed into the cylinder with a forklift to powder
  • Aug
    10
    ​What Factors Should Be Considered When Choosing A Silage Round Baler
    What factors should be considered when choosing a silage round balerWhen considering purchasing a circular silage baler, there are a number of important factors to keep in mind to ensure that you make the best possible decision. Here are some essential factors to help guide your decision-making pro
  • Aug
    08
    These Few Tricks Can Greatly Extend The Service Life of The Grain Milling Machine
    These Few Tricks Can Greatly Extend The Service Life of The Grain Milling Machine 1. Low flour yieldCause of the fault➭Poor quality of wheat, mostly red-skinned wheat➭Poor water regulationTroubleshooting methods➭Pay attention to wheat matching➭Guaranteed wheat tempering time2. Flour is chewyCause of
  • Aug
    02
    Grain Milling Machine Common Fault Analysis and TroubleShooting Table
    Grain Milling Machine Common Fault Analysis and TroubleShooting Table1. Raw grain preparation1.The raw grain must be cleaned and moistened with water for 12 to 14 hours. The moisture content should be controlled between 13.5 and 14.5%.2. Check whether the transmission of each transmission component
  • Aug
    01
    How to Install and Use Flour Milling Machine?
    I. Installation and adjustment of Wheat Corn Milling Machine1. Before installation and use, you must carefully read the instruction manual and be familiar with the installation and use requirements of the equipment.2. Before installing Flour Milling Machine, you must check whether there is any damag
  • Aug
    01
    How to Solve The Common Faults of Flour Milling Machine?
    What are the common faults of Corn Wheat Milling Machine?1. Low flour yield2. Flour is chewy3. Unqualified coarseness4. Poor flour color5. Unqualified flour moisture6. High bran content Solutions to common faults of Corn Flour Mill1. Pay attention to wheat matching; recycle wheat grains from waste m
  • Aug
    01
    How To Solve Common Faults of Oil Press? Follow The Oil Press Machinery Manufacturer To Do This！
    How to solve common faults of oil press? Follow the oil press machinery manufacturer to do this！ ●The screw shaft is stuckReason1) The belt slips2) Stones and iron filings are mixed into the pressing chamberTroubleshooting method1) Adjust the belt tightness2) Pull out the screw and remove the materi
  • Jul
    31
    Manual of Floating Fish Feed Pellet Extruder
    Manual of Floating Fish Feed Pellet Extruder What's the Usse of feed pellet extruder ?Mainly used for a variety of aquatic products, pet and other pellet feed curing molding process (such as: float and sink of fish feed, frog feed, pellet suckling pig feed). What's the working principle of floating
  • Jul
    29
    Teach You A Few Tricks To Easily Extend The Service Life of Feed Pellet Machine
    Teach you a few tricks to easily extend the service life of feed pellet machineRegular maintenance of the feed pellet machine is important to ensure its smooth and efficient operation.Certainly, here are a few tricks to easily extend the service life of a feed pellet machine:1. Choose high-quality r
  • Jul
    22
    Mastering the Art of TMR Feed Mixer Machine Evaluation
    Mastering the Art of TMR Feed Mixer Machine EvaluationA One-Second Inspection Guide to Cutting Maintenance Costs In the competitive livestock and dairy farming industries, total mixed ration (TMR) feed mixers are critical pieces of equipment responsible for blending a precise combination of ingredie
  • Total 7 pages  Go to Page
  • Go
Good quality-ontime delivery-good service
Leabon Equipment
1)We are the professional manufacturer, which has abundant experience of the machine, also we own research and development team.
 
2) The professional and timely 24 hours after-sale service.
 
3) The relative manual and video of the machine installation and instruction will be provided for you.

4) ODM&OEM Provided.
 
5) The engineer is available to  install and training for oversea projects.
Read More >>
Customer evaluation

CONTACT US

Company Name: Zhengzhou Leabon Feed Machinery Co.,LTD.
ADD: 1188 Zhongzhou Avenue Jinshui District, Zhengzhou
City,Henan Province-CHINA
TEL: +86 371 87535015      
FAX: +86 371 87535381  
Cell Phone: +86 159 3904 5080
Contact Person：Carolyn Ji
Email: sales@zzleabon.cn
YOUR FEEDBACK

QUICK LINKS

FOLLOW

Copyright © 2016 Zhengzhou Leabon Feed Machinery Co., Ltd.  All rights reserved Supported by Leadong