Silage Harvester Balers: Machines Also Need Winterization!

●Product Description

The newly developed silage harvester baler adopts roller-type grain crushing, with a crushing rate of over 98%, which can maximize the preservation of nutrients in silage, enhance its palatability and digestibility, and is highly economical. At the same time, it is equipped with a 2.2-meter disc-type harvesting table, which can harvest and crush corn and straw crops more evenly without fear of the influence of tall crops, with higher efficiency and faster speed, so that the silage can have a better degree of compaction, which is conducive to fermentation and better feed quality!

●The operation of silage harvester baler

1. **Harvesting**: The machine cuts and collects the forage crop from the field. Sharp blades within the harvester ensure a clean cut, while a collection system gathers the chopped material.

2. **Chopping**: Once harvested, the forage is chopped into small pieces to promote fermentation and improve packing efficiency.

3. **Baling**: After chopping, the machine compresses the forage into dense bales, which are then wrapped in netting or twine to hold them together.

4. **Discharge**: The finished bales are automatically discharged from the machine, ready for storage or transport.

●Maintenance

1. **Regular Inspections**: Conduct routine checks on critical components, such as blades, belts, and baling mechanisms, to identify wear and potential issues early.

2. **Cleaning**:After the mechanical operation is completed, clean the vehicle. Before entering the warehouse, to ensure the safety of the machinery through the winter, please check the antifreeze level in the water tank. If the water tank is filled with water, it must be drained first; if it is antifreeze, it is necessary to take into account the local temperature conditions and do a good job of engine maintenance. It is recommended that the antifreeze should also be drained to prevent the machine from freezing and affecting the next use.

After the winter operation is completed, it is recommended to disassemble the vehicle battery to prevent the battery from running low. Check the battery power before the preparatory operation

3. **Monitor Baling Quality**: Regularly check the quality of the bales produced to ensure they meet the desired specifications and adjust settings as needed.