High Efficient Dual Shaft Mixer

What’s the usage of applicable scope of mixer ?

SSHJ Dual-shaft Paddle High-efficient Mixer is widely used to mix the materials in the shape of powder, pellet, flake, piece and sticky materials in the industries of feed, food, chemicals, pharmacy, agricultural pharmacy, etc.

What’s the feature of feed mixer ?

Designed and manufactures by several scientific research units with the summing-up of essence of dual-shaft paddle mixers at home and abroad, SSHJ Dual-shaft Paddle High-efficient Mixer is an ideal mixing equipment with low speed, high efficiency, power saving and high quality. It has high mixing homogeneity and short mixing period without dead mixing corner. Each batch of material can generally by mixed to homogeneity within 30-120 seconds. Full-length open-door structure is adopted at the bottom for discharging, so discharging is quick without remainder. The seal of discharging door is reliable with out phenomenon of material leakage. The load has a wide changeable scope. There is a built-in oil-adding pipe and various   liquids can be largely added. This machine has the features of compact structure, fine appearance, less occupying space than other mixing equipment, quick and gentle mixing, stable performance, low noise, no dust, no environmental pollution, etc.

What are the precautions before using the mixer?

1 Full check should be made before installing the equipment.

2 This machine discharges through a big open-door, the connecting port of discharge is the flange edge of machine shell. A hopper with equivalent volume should be installed under the machine body.

3 Install the driving chain, adjust the position of tension chain wheel to make chain drive smoothly and make main shaft rotate on the direction of arrow shown on the mixer shell, then install the chain cover.

4 Install the liquid-adding system.

5 Before use, check to see if discharging door is open or close. Ajust cylinder pressure and the position of limit switch so that discharging door is on a level with the bottom of machine shell when it is close, and reach a definite angle when it is open, and cylinder runs smoothly with a proper speed.