Why Are Manufacturers Scrambling To Use This Corn Peeling And Polishing Machine? The Reason Is...

1.What grains are peeling and polishing machines mainly used for? What are they made of?

NF--280 is mainly composed of peeling room, fan, blower, rotating mechanism, feeding and discharging parts, dust removal device, etc. NF-280 corn peeling and polishing machine is mainly used for peeling and polishing corn, millet, sorghum and rice. The material is squeezed, crushed, peeled, germized, black navel removed and polished between the rotating drum and the screen. The kernel and chaff are separated under the action of wind, and the husk and impurities are collected uniformly by the cyclone.

 

2.What are the characteristics of the peeling and polishing machine？

1）Multifunctional

2）Complete separation of kernel and bran

3）Easy to operate

4）Low energy consumption

5）Simple and efficient

3.How to peel and polish different raw materials？

1）Corn peeling: This machine peels corn using a wet peeling method. For every 100 kg of corn, add 6-8 catties of clean water or warm water. After mixing evenly, the excess water needs to be discharged from the container and then poured into the hopper to start production (the pressure can be adjusted according to customer requirements). Horny corn needs to be peeled once, while hybrid corn needs to be peeled twice.

2) Wheat peeling: Wheat peeling adopts the wet peeling method. Mix 2-3 kilograms of water for every 100 kilograms of wheat. After mixing, moisten the grain for 3-4 minutes and start processing. The operation method is the same as corn peeling, and it needs to be peeled cleanly in one or two times.

3) Rice peeling: Dry milling, adjust the coordination of the feed gate and the outlet pressure gate to peel and whiten in one time.