Wet Type Fish Feed Extruder
Product Description
Wet Type Fish Feed Extruder
Features
It takes the international advanced granule structure, adopting the soft knife joint forms, realize the CVT, can arbitrary cut into the required length of product, it is not easy to produce the burr
The design is novel, unique, simple structure, easy to assemble, disassemble and operate
The screw and barrel adopt special wear-resisting, high temperature resistant alloy steel material which by heat treatment, have the characteristics of wear resistance and long working life
With distinctive turbocharged punching equipment, ensure the forage yield and quality. And with electric heating device to improve feed puffing rate
The main motor adopts high-quality Y series three-phase motor to ensure that power is strong
Speed-adjustable feeding device, more convenient operation, evenly feed, prevent suppress machine.
The discharging template change is simple, only change the required aperture template if you need different aperture feed
Produced floating feed pellets can float on water more than 12hours, not pollute the water and easy digested
Specification
| Model | Capacity (kg/h) | Main power(KW) | Feeding power(kw) | Cutting power(kw) | Modulator power(kw) | Screw diameter(kw) |
| DSP60-III | 180-200 | 15 | 0.75 | 0.75 | 0.37 | Φ60 |
| DSP70-III | 250-300 | 18.5 | 0.75 | 0.75 | 1.5 | Φ70 |
| DSP80-III | 350-400 | 22-30 | 1.1 | 0.75 | 1.5 | Φ80 |
| DSP90-III | 500-600 | 37 | 1.1 | 1.1 | 2.2 | Φ90 |
| DSP120-III | 700-800 | 55 | 1.1 | 1.1 | 2.2 | Φ120 |
| DSP1350-III | 1000-1500 | 75 | 1.5 | 2.2 | 2.2 | Φ133 |
| DSP160-III | 1800-2500 | 90 | 2.2 | 2.2 | 3.5 | Φ155 |
| DSP200-III | 3000-4000 | 132 | 2.2 | 3.0 | 4.5 | Φ195 |