Fish Feed Pellet Extruder
Publish Time: 2023-09-08 Origin: Site
Product Description
1.It takes the international advanced granule structure,adopting the soft knife joint forms,realize the CVT,can arbitrary cut into the required length of product,it is not easy to produce the burr.
2.With distinctive turbocharged punching equipment,ensure the forage yield and quality.And with electric heating device to improve feed puffing rate.
3.Speed-adjustable feeding device,more convenient operation,evenly feed,prevent suppress machine.
4.The discharging template change is simple,only change the required aperture template if you need different aperture feed.
5.Produced floating feed pellets can float on water more than 12hours,not pollute the water and easy digested.
Dry Type Feed Extruder | Wet Type Feed Extruder |
Different Type Extruder Product Parameter
Wet Type Extruder
Model | Capacity | Main | Feeding | Cutting | Modulator Power(kw) | Screw |
DSP60-III | 180-200 | 15 | 0.75 | 0.75 | 0.37 | φ60 |
DSP70-III | 250-300 | 18.5 | 0.75 | 0.75 | 1.5 | φ70 |
DSP80-III | 350-400 | 22-30 | 1.1 | 0.75 | 1.5 | φ80 |
DSP90-III | 500-600 | 37 | 1.1 | 1.1 | 2.2 | φ90 |
DSP120-III | 700-800 | 55 | 1.1 | 1.1 | 2.2 | φ120 |
DSP135-III | 1000-1500 | 75 | 1.5 | 2.2 | 2.2 | φ133 |
DSP160-III | 1800-2500 | 90 | 2.2 | 2.2 | 3.5 | φ155 |
DSP200-III | 3000-4000 | 132 | 2.2 | 3.0 | 4.5 | φ195 |
Dry Type Extruder
Model | Capacity | Main | Feeding | Cutting | Screw |
DGP40-C | 30-40 | 5.5 | 0.4 | 0.4 | φ40 |
DGP50-C | 60-80 | 11 | 0.4 | 0.4 | φ50 |
DGP60-C | 120-150 | 15 | 0.4 | 0.4 | φ60 |
DGP70-B | 180-200 | 18.5 | 0.4 | 0.4 | φ70 |
DGP80-B | 200-250 | 22 | 0.4 | 1.1 | φ80 |
DGP90-B | 320-350 | 30 | 1.1 | 1.5 | φ90 |
DGP120-B | 500-600 | 55 | 1.1 | 2.2 | φ120 |
DGP135-B | 700-800 | 75 | 1.1 | 2.2 | φ133 |
DGP160-B | 1000-1200 | 90 | 1.5 | 2.2 | φ155 |
DGP200-B | 1800-2000 | 132 | 1.5 | 3.0 | φ195 |